Item# CKG1020D 10″x20″ Surface Grinder with 3-axis Automatic Feed

Item# CKG1020D 10″x20″ Surface Grinder with 3-axis Automatic Feed

The CKG1020D is a classically-styled, high-quality Surface Grinder with 3-axis automatic-feed (table, column and spindle head), including magnetic chuck and coolant, which for whose need the works more efficient than manual operation models! Heavy castings, smooth operation, and dependable precision are built into this well-made unit. The manual feeds for 3-axis with the precision handwheel controls are no problem. The cross feed handwheel is graduated in 0.02mm (0.001") increments and moves the table 5mm (0.2") per revolution, automatic and rapid cross feeds are available. The vertical feed handwheel is graduated in 0.01mm (0.004") increments and moves the grinding wheel elevation 2mm (0.1") per revolution, automatic down feed rate is 0.002~0.2mm. To ensure an extremely high degree of accuracy, the table is constructed with precision hardened and ground double V-ways for longitudinal feed, and the spindle uses super-precision P4 spindle bearings. Also includes coolant system, magnetic chuck, halogen work light, precision wheel-balancing tool, and diamond wheel dresser.



  • Precision hardened and ground double V-ways
  • Super-precision P4 grade spindle bearings
  • Flood coolant system
  • Automatic and manual feeds for table, column and spindle head
  • Reliable hydraulic station
  • Cast iron structure
  • Halogen work light
  • Grinding wheel: 25mm (1″) W x200mm (8″) Dia.
  • Splash guard
  • Power indicator lights
  • Magnetic chuck included
  • One-shot oiler
  • Diamond wheel dresser and precision wheel-balancing tool


Optional accessories:

  • Powered longitudinal and cross feed
  • Digital readout
  • Suction device
  • Magnetic separator
  • Rear splash guard
  • Overhead parallel dresser
  • Radius dresser
  • Angle dresser
  • Chuck controller
  • Spindle motor: 2.2kw
  • Table surface: 255mm x510mm (10″ x 20″)
  • Longitudinal travel: 675mm (22-5/8″)
  • Cross travel: 280mm (11″)
  • distance between spindle center to table: 535mm (21″)
  • T-slot and size: 14mm (1/2″) stud, 22mm (7/8″) head
  • Grinding wheel: 25mm (1″) W x 200mm (8″) Dia.
  • table load: 300kgs
  • Table speed: 5-25m/min
  • Automatic crossfeed of saddle: 0.5-12mm
  • Automatic down feed of spindle head: 0.002-0.2mm
  • Spindle speed: 2850rpm(50hz), 3450rpm(60hz)
  • Hydraulic motor: 1.5kw
  • Coolant motor: 90w
  • Floor space: 1900mm x2300mm (75″ x90″)
  • Packing dimensions: 1960mm x1610mm x2140mm

(77-1/4″ L x 63-3/8″ W x 84-1/4″ H)

  • Net weight: 1680kgs (3700 lbs)
  • Approximate shipping weight: 1930kgs (4250 lbs)

    Your Name :

    Your Email:

    error: Content is protected !!
    × How can I help you?