fbpx

Item# CZX40H Drilling&Milling Machine with Geared and Tilting Head

The CZX40H drilling and milling machines is similar machine capacity as CZX40, but higher column than CZX40. It futures a 1.1kw motor, 6 drilling speeds from 75-1600rpm, tilting and swivel geared head, rack and pinion wind-up table and head, precision spindle, ground cast iron table and base, thick walled column, etc…These features allow a whole range of milling, slotting, grooving, drilling and boring operations to be made.

Category:

INQUIRY

Features

  • Gear driven head 6 speeds from 75 to 1600rpm
  • Mill head tilts to ±90º from vertical
  • Mill head rotates 360 º around the column
  • Micro down feed adjustment
  • Large 600 x 190mm ground work table with T-slots
  • 650 x450mm ground base with T-slots
  • Precision MT#3 spindle supported by the heavy duty tapered roller bearings
  • Swivel spindle guard as standard
  • Adjustable leadscrew nuts eliminating backlash on both axis
  • Fine feed hand wheel operating quill feed
  • Thick walled column ensuring greater rigidity
  • Emergency stop switch and overload protection
  • Adjustable gibs on table
  • Adjustable table and drill length stops
  • Rack and pinion wind-up head and work table
  • Spindle lock for quill
  • Table lock on both axis
  • Metric dial graduations @ 0.05mm for X & Y axis

 

Optional equipments:

  • Digital readout
  • Power feed for worktable
  • Halogen lamp
  • Coolant system
  • Auto feed for spindle
  • 1/1.5kw 2-speed motor
  • 730mm x210mm work table
  • drilling capacity: 40mm
  • face milling capacity: 80mm
  • end milling capacity: 32mm
  • Table size: 600mm x190mm
  • Table longitudinal travel: 370mm
  • Table cross travel: 190mm
  • Spindle taper: MT#3 or MT#4 or R8
  • Spindle travel: 120mm
  • Spindle speed: 6 steps, 75-1600rpm
  • distance between spindle end and table surface: 610mm
  • distance between spindle end and base surface: 1180mm
  • Max: center distance between spindle and column: 260mm
  • Column diameter: 115mm
  • Head tilt (left~right): ±90°
  • Head swivel: 360 º
  • Motor: 1.1kw
  • T-slot width: 12mm
  • Packing dimensions: 830mm x760mm x1850mm
  • Net weight: 340kgs
  • Gross weight: 390kgs

Your Name :

Your Email:

error: Content is protected !!