Our CZ25 is a heavy duty geared head drilling machine with a 0.85/1.1kw, 2 speed motor, a 98mm column diameter, and a 28mm drilling capacity in cast iron or 25mm in steel. The geared head is equipped with a forward/reverse switch, 12 spindle speeds from 75–3200 RPM, convenient quick-change gearbox controls for spindle speed, and a MT#3 spindle taper. With a spindle travel of 130mm, this machine can handle whatever comes its way. The 380mmx380mm worktable tilts 45 degrees left and right, and has a vertical travel of 700mm. Both head and table are mounted on independent rack and pinions for ultimate positioning versatility. Two 14mm width T-slots are located on both table and base for added usability.
Our CZ50 is a heavy duty geared head drilling machine with a 3kw motor, a 180mm column diameter, and a 50mm drilling capacity in cast iron or 33mm in steel. The geared head is equipped with a forward/reverse switch, 18 spindle speeds from 55–1450 RPM, convenient quick-change gearbox controls for spindle speed, and a MT#4 spindle taper. With a spindle travel of 210mm, this machine can handle whatever comes its way. The 580mmx580mm worktable with electronic lifting tilts 45 degrees and swings 180 degrees, and has a vertical travel of 650mm. Both head and table are mounted on independent rack and pinions for ultimate positioning versatility. Two 18mm width T-slots are located on both table and base for added usability.
Our CZ40 is a heavy duty geared head drilling machine with a 0.85/1.5kw, 2-speed motor, a 150mm column diameter, and a 40mm drilling capacity in cast iron or 24mm in steel. The geared head is equipped with a forward/reverse switch, 18 spindle speeds from 50–1450 RPM, convenient quick-change gearbox controls for spindle speed, and a MT#4 spindle taper. With a spindle travel of 180mm, this machine can handle whatever comes its way. The 560mmx560mm worktable tilts 45 degrees and swings 180 degrees, and has a vertical travel of 720mm. Both head and table are mounted on independent rack and pinions for ultimate positioning versatility. Two 18mm width T-slots are located on both table and base for added usability.
Our CZ32 is a heavy duty geared head drilling machine with a 1.1/1.5kw, 2 speed motor, a 125mm column diameter, and a 32mm drilling capacity in cast iron or 25mm in steel. The geared head is equipped with a forward/reverse switch, 12 spindle speeds from 75–3200 RPM, convenient quick-change gearbox controls for spindle speed, and a MT#4 spindle taper. With a spindle travel of 180mm, this machine can handle whatever comes its way. The 460mmx460mm worktable tilts 45 degrees left and right, and has a vertical travel of 720mm. Both head and table are mounted on independent rack and pinions for ultimate positioning versatility. Two 14mm width T-slots are located on both table and base for added usability.