fbpx

spindle moulders

Item# CWS300 3HP Spindle Moulder with 4 speeds & 30mm Spindle

This full-capacity wood spindle moulder CWS300 will handle the smallest profile cutters, and use up to largest panel cutters with its 30mm spindle, 100mm travel. Running on a 3hp 220 volt single phase motor the CWS300 has a 4-speed pulley system, reversible speeds also provide the greatest flexibility for accomodating cutters of all sizes, allows the operator to choose the best speed for the application. The fully machined cast iron table and extension has the size of 716mm long and 776mm width. The included fence system is independent from left to right for fast and easy set up and includes a safety guard. Built-in mobile wheels provide convenient movement in your workshop.

Item# VSM50 Benchtop Spindle Moulder

A power-driven router is a machine sometimes difficult to use, the work can be dangerous with a very fast machine in rotation. This router table will remove all fears, as a router it has a table, a guide and a tree protector. Like a conventional router it is equipped with a speed variator and thanks to its different clamps provided, the range of router bits in tail of 6, 8 and 12 mm is adaptable. This machine is suitable for all home woodworkers, DIY enthusiasts and craftmen. For real convenience, the VSM50 is compact and unobtrusive - ideal for bench top use in the home workshop.

Item# CMX16LT 3HP Wood Spindle Moulder with 4 Speeds

The CMX16LT features large precision ground cast iron table, a steel base cabinet and a powerful 3hp induction motor… These basic ingredients make up this fantastic spindle moulder. The height of the spindle, which is a standard 30mm diameter, is controlled by the large hand wheel which can then be locked in position. A simple belt change selects the correct spindle speed for the tooling. This 4 speed version provides even more versatility;  1400rpm - Drum Sanding  4000rpm - Moulding Hardwoods  6000rpm - Moulding Softwoods  9000rpm – Routing The cutter hood is cast iron with a 100mm dust outlet at the center providing efficient extraction for this machine which can produce a high volume of dust and chips. The two aluminum fence plates are adjustable to set the width of the opening, to suit the cutters being used. The outfeed fence can also be stepped out, controlled by a fine pitch thread adjuster, for operations where the complete edge of the workpiece is being removed. Fully adjustable guards are connected to a hinged plate which can quickly be lifted to allow clear access to change the tooling. Supplied with set of spindle shims, 1/2" routing bit collet, 4 adjustable height rubber feet. We also provide 3-piece drum sanding kit (1-1/2", 2" and 3") as optional to extend this machine a spindle drum sander.

Item# CWS150S 2HP Spindle Moulder with Sliding Table Attachment

The CWS150S is ideal for panel work, cutting end grain or making tenons. The sliding table runs on a set of bearings giving a smooth and precise action and can be locked in position when not required. The 620mm (24-1/2”) capacity is perfect for cabinet doors. The mitre fence can be adjusted from 90 degrees to 30 degrees each way and is also fitted with a work clamp and flip over stop. A precision ground cast iron table, a steel base cabinet and a 2hp induction motor are the basic ingredients which make up this fantastic spindle moulder. The height of the spindle, which is a standard 30mm diameter, is controlled by the large hand wheel which can then be locked in position. A simple belt change selects the correct spindle speed for the tooling. This 4 speed version provides even more versatility;  1500rpm - Drum Sanding  4500rpm - Moulding Hardwoods  6500rpm - Moulding Softwoods  8500rpm – Routing The cutter hood is cast iron with a dust outlet at the center providing efficient extraction for this machine which can produce a high volume of dust and chips. The two aluminum fence plates are adjustable to set the width of the opening, to suit the cutters being used. The outfeed fence can also be stepped out, controlled by a fine pitch thread adjuster, for operations where the complete edge of the workpiece is being removed. Fully adjustable guards are connected to a hinged plate which can quickly be lifted to allow clear access to change the tooling. Supplied with sliding table attachment, set of spindle shims, 1/2" routing bit collet for, 4 adjustable height rubber feet.

Item# CWS150C 2HP Spindle Moulder with Sliding Carriage

Fitting neatly into the gap between the heaviest router table and an industrial sized spindle moulder this machine is ideally suited to small professional workshops. A precision ground cast iron table, a steel base cabinet and a 2hp induction motor are the basic ingredients which make up this fantastic recently upgraded spindle moulder. The height of the spindle, which is a standard 30mm diameter, is controlled by the large hand wheel which can then be locked in position. A simple belt change selects the correct spindle speed for the tooling. The 4-speed version provides even more versatilities:  1500rpm - Drum Sanding  4500rpm - Moulding Hardwoods  6500rpm - Moulding Softwoods  8500rpm - Routing The cutter hood is cast iron with a dust outlet at the center providing efficient extraction for this machine which can produce a high volume of dust and chips. The two aluminum fence plates are adjustable to set the width of the opening, to suit the cutters being used. The outfeed fence can also be stepped out, controlled by a fine pitch thread adjuster, for operations where the complete edge of the workpiece is being removed. Fully adjustable guards are connected to a hinged plate which can quickly be lifted to allow clear access to change the tooling. The sliding carriage consists of a cast iron table with four bearing guides running along an aluminum extrusion. The fence angle can be set accurately between 90 and 45 degrees with a useful stop to quickly return to 90 degrees again. A hold down clamp and a length stop complete the equipment. Supplied with sliding carriage, set of spindle shims, 1/2" routing bit collet, adjustable height rubber feet

Item# CWS220 2HP Wood Shaper with two speed & 3/4″ spindle

The CWS220 wood shaper offers many great features at an even better price. Running on a 2hp 220 volt single phase motor the CWS220 has a two speed pulley system. This shaper woodworking system allows the operator to choose the best speed for the application; either 6900 or 9900 rpm. The spindle is 3/4". It also has a wrench slot for quick cutter set up and removal. The fully machined cast iron table on CWS220 has the size of 24" x 21". The included fence system is independent from left to right for fast and easy set up and includes a safety guard.


error: Content is protected !!
× How can I help you?