The CMX16LT features large precision ground cast iron table, a steel base cabinet and a powerful 3hp induction motor… These basic ingredients make up this fantastic spindle moulder. The height of the spindle, which is a standard 30mm diameter, is controlled by the large hand wheel which can then be locked in position. A simple belt change selects the correct spindle speed for the tooling. This 4 speed version provides even more versatility;  1400rpm - Drum Sanding  4000rpm - Moulding Hardwoods  6000rpm - Moulding Softwoods  9000rpm – Routing The cutter hood is cast iron with a 100mm dust outlet at the center providing efficient extraction for this machine which can produce a high volume of dust and chips. The two aluminum fence plates are adjustable to set the width of the opening, to suit the cutters being used. The outfeed fence can also be stepped out, controlled by a fine pitch thread adjuster, for operations where the complete edge of the workpiece is being removed. Fully adjustable guards are connected to a hinged plate which can quickly be lifted to allow clear access to change the tooling. Supplied with set of spindle shims, 1/2" routing bit collet, 4 adjustable height rubber feet. We also provide 3-piece drum sanding kit (1-1/2", 2" and 3") as optional to extend this machine a spindle drum sander.