fbpx

Item# CZ32 Vertical Geared Head Drilling Machine with 32mm Drilling Capacity, includes Automatic Feed and Tapping

Item# CZ32 Vertical Geared Head Drilling Machine with 32mm Drilling Capacity, includes Automatic Feed and Tapping

Our CZ32 is a heavy duty geared head drilling machine with a 1.1/1.5kw, 2 speed motor, a 125mm column diameter, and a 32mm drilling capacity in cast iron or 25mm in steel. The geared head is equipped with a forward/reverse switch, 12 spindle speeds from 75–3200 RPM, convenient quick-change gearbox controls for spindle speed, and a MT#4 spindle taper. With a spindle travel of 180mm, this machine can handle whatever comes its way. The 460mmx460mm worktable tilts 45 degrees left and right, and has a vertical travel of 720mm. Both head and table are mounted on independent rack and pinions for ultimate positioning versatility. Two 14mm width T-slots are located on both table and base for added usability.

Category:

INQUIRY

Features

  • Gear box, tables are made by high quality cast iron
  • Built-in coolant system as standard
  • Strength spindle is supported by heavy duty tapered roller bearings
  • Thread tapping with auto reverse
  • Automatic feed range (0.06, 0.12, 0.18mm/rev)
  • 12 drilling speeds 75-3200rpm, 1.1kw/1.5kw 2-speed motor
  • Spindle can be locked at any position
  • Precision gears for extreme low noise
  • Worktable could be rotated and could inclined ±45°
  • Manual lifting of worktable
  • Rack & pinion table & drill head
  • Adjustable accurate depth setting for increased productivity
  • Forward/reverse & safety stop switches
  • Swivel safety drilling chuck guard
  • T slotted work table and base
  • Keyed drill chuck and arbor
  • Built-in worklamp
  • drilling and tapping capacity: 32mm, M25
  • Spindle travel: 180mm
  • Distance between spindle center and column surface: 300mm
  • distance between spindle nose and worktable: 720mm
  • Distance between spindle nose and base: 1200mm
  • travel of worktable: 720mm
  • Spindle taper: MT#4
  • Spindle power feed range: 0.06, 0.12, 0.18mm/rev
  • Spindle speed: 75-3200rpm
  • Spindle speed steps: 12
  • Column diameter: 125mm
  • Worktable size: 460mm x460mm
  • Swivel angle of worktable:±45°
  • Base size: 620mm x450mm
  • T-slot width: 14mm
  • Coolant motor: 40w
  • Spindle motor (2 speed): 1.1kw/1.5kw
  • Packing dimensions: 570mm x730mm x2200mm
  • Net weight: 350kgs
  • Gross weight: 400kgs

    Your Name :

    Your Email:

    error: Content is protected !!