Item# CZ40 Vertical Geared Head Drilling Machine with 40mm Drilling Capacity, includes Automatic Feed and Tapping

Item# CZ40 Vertical Geared Head Drilling Machine with 40mm Drilling Capacity, includes Automatic Feed and Tapping

Our CZ40 is a heavy duty geared head drilling machine with a 0.85/1.5kw, 2-speed motor, a 150mm column diameter, and a 40mm drilling capacity in cast iron or 24mm in steel. The geared head is equipped with a forward/reverse switch, 18 spindle speeds from 50–1450 RPM, convenient quick-change gearbox controls for spindle speed, and a MT#4 spindle taper. With a spindle travel of 180mm, this machine can handle whatever comes its way. The 560mmx560mm worktable tilts 45 degrees and swings 180 degrees, and has a vertical travel of 720mm. Both head and table are mounted on independent rack and pinions for ultimate positioning versatility. Two 18mm width T-slots are located on both table and base for added usability.



  • Gear box, tables are made by high quality cast iron
  • Built-in coolant system as standard
  • Strength spindle is supported by heavy duty tapered roller bearings
  • Thread tapping with auto reverse
  • Automatic feed range (0.1, 0.2mm/rev)
  • 18 drilling speeds 50-1450rpm, 0.85/1.5kw 2 speed motor
  • Spindle can be locked at any position
  • Precision gears for extreme low noise
  • Worktable swings ±180° and tilts ±45°
  • Automatic tools ejector
  • Manual lifting of worktable
  • Rack & pinion table & drill head
  • Adjustable accurate depth setting for increased productivity
  • Forward/reverse & safety stop switches
  • Swivel safety drilling chuck guard
  • T slotted work table and base
  • Keyed drill chuck and arbor
  • Built-in worklamp


Optional equipments:

  • Tilting worktable
  • “L” type worktable
  • Electronic lifting worktable
  • Electromagnetism clutch transmission of spindle (Model:CZ40E)
  • drilling and tapping capacity: 40mm, M24
  • Spindle travel: 180mm
  • Distance between spindle center and column surface: 350mm
  • Distance between spindle nose and worktable: 50-770mm
  • Distance between spindle nose and base: 1215mm
  • travel of worktable: 720mm
  • Spindle taper: MT#4
  • Spindle power feed range ( 2 steps): 0.1, 0.2mm/rev
  • Spindle speed: 50-1450rpm
  • Spindle speed steps: 18
  • Column diameter: 150mm
  • Worktable size: 560mm x560mm
  • Swivel angle of worktable:±180°
  • Worktable tilting: ±45°
  • Base size: 735mm x510mm
  • T-slot width: 18mm
  • Coolant motor: 75w
  • Spindle motor (2 speed): 0.85/1.5kw
  • Packing dimensions: 580mm x1100mm x2270mm
  • Net weight: 500kgs
  • Gross weight: 600kgs

    Your Name :

    Your Email:

    × How can I help you?