Item# CZ50 Vertical Geared Head Drilling Machine with 50mm Drilling Capacity, includes includes Automatic Feed and Tapping
Our CZ50 is a heavy duty geared head drilling machine with a 3kw motor, a 180mm column diameter, and a 50mm drilling capacity in cast iron or 33mm in steel. The geared head is equipped with a forward/reverse switch, 18 spindle speeds from 55–1450 RPM, convenient quick-change gearbox controls for spindle speed, and a MT#4 spindle taper. With a spindle travel of 210mm, this machine can handle whatever comes its way. The 580mmx580mm worktable with electronic lifting tilts 45 degrees and swings 180 degrees, and has a vertical travel of 650mm. Both head and table are mounted on independent rack and pinions for ultimate positioning versatility. Two 18mm width T-slots are located on both table and base for added usability.
Features：
- Gear box, tables are made by high quality cast iron
- Electromagnetism clutch transmission of spindle
- Built-in coolant system as standard
- Strength spindle is supported by heavy duty tapered roller bearings
- Thread tapping with auto reverse
- Automatic feed range (0.1, 0.2,0.3,0.4mm/rev)
- 18 drilling speeds 55-1450rpm, 3kw motor
- Spindle can be locked at any position
- Precision gears for extreme low noise
- Worktable swings ±180° and tilts ±45°
- Automatic tools ejector
- Electronic lifting of worktable
- Rack & pinion table & drill head
- Adjustable accurate depth setting for increased productivity
- Forward/reverse & safety stop switches
- Swivel safety drilling chuck guard
- T slotted work table and base
- Keyed drill chuck and arbor
- Built-in worklamp
Optional equipments:
- Tilting worktable
- “L” type worktable
- Digital readout for depth
- drilling and tapping capacity: 50mm, M33
- Spindle travel: 210mm
- Distance between spindle center and column surface: 375mm
- Distance between spindle nose and worktable: 80-800mm
- Distance between spindle nose and base: 1325mm
- travel of worktable: 650mm
- Spindle taper: MT#4
- Spindle power feed range ( 4 steps): 0.1, 0.2, 0.3, 0.4mm/rev
- Spindle speed: 551450rpm
- Spindle speed steps: 18
- Column diameter: 180mm
- Worktable size: 580mm x580mm
- Swivel angle of worktable：±180°
- Worktable tilting: ±45°
- Base size: 860mm x580mm
- T-slot width: 18mm
- Coolant motor: 75w
- Spindle motor: 3kw
- Packing dimensions: 590mm x900mm x2250mm
- Net weight: 760kgs
- Gross weight: 860kgs
